Multiple NIC, would like to make one management

I have a Dell Precision with a single 1Gb copper LOM and to that I've added in a 10G SFP card. After shooting myself in the foot and messing up vrmb0 by removing one of the SFP ports from the bridge, and then taking about 30mins to figure it out (move the SFP cable to the other port...whew, it worked) I'd like to configure the LOM NIC to have a separate IP so I have a backdoor if you will.

I believe all I need to do it set an IP on eno1 and then I'll be good. I also believe that vrmb0 will continue to listen to Proxmox WebUI requests as well which is fine. I just want that second means of access and all my LXC/VM traffic will only go out over the SFP connection.

Eventually I'll grab another SFP cable and wire up the second port and add that into the bridge and then configure load balancing or failover, not really sure yet.

Am I on the right track?